Move Over Bob · Career guide

Raising the Bar: Your Ironworker Career Path, Explained

Ironworkers build the steel frames of skyscrapers and bridges and place the rebar inside concrete. Most train through a paid apprenticeship of three to four years. You don’t need a four-year degree.

An ironworker in a welding hood and leathers stands in a blue lift beneath structural steel.
Median pay $62,780Half of structural iron and steel workers earn more, half earn less. Rebar: $58,970.
Top 10% earn over $108,260Structural iron and steel. Rebar: $104,540.
Training 3–4 yearsPaid apprenticeship, with raises as you progress.
Openings per year About 6,800Mostly replacing people who retire or change jobs.

National figures. Your pay will depend on location, specialty and employer. Source: Bureau of Labor Statistics, pay as of May 2025, projections 2025–2035.

Step by step

The path

Most ironworkers start with an apprenticeship. You’ll usually need to be 18 to apply, and requirements vary by program.

Step 1 · Start here

Diploma or GED

Most programs require one. Math, geometry, shop and welding classes help.

Step 2 · Before you apply

Basic skills

Learn hand and power tools, measuring and blueprints. An entry-level construction job counts.

Step 3 · Usually 18 or older

Apply

Apply through a local Iron Workers union, a contractor association or a registered sponsor, which is a group approved to run apprenticeships.

Step 4 · 3–4 years, paid

Apprenticeship

You get paid

A job where you get paid while you learn. You work on site and take classes in steel, reinforcing, welding, rigging (moving heavy loads safely), blueprints and safety.

Step 5 · After training

Journeyman

The title for a fully trained ironworker, including women. You work with less direct supervision.

Step 6 · Ongoing

Advance

Credentials in welding, rigging and crane signaling (directing the crane operator) can lead to more responsibility and supervisor roles.

What a year of apprenticeship looks like

2,000+ paid hours on the job144+ hours of class
Your checklist

What you can do now

Tap a card to flip it

Four directions you can go

Your training may cover several of these before you choose one. Job growth differs between them, so ask what work is available near you.

Quick check

Is this work for you?

Here’s what the job asks of you. Answer honestly for each one.

Height

Structural ironworkers can work hundreds of feet above the ground. You need balance and comfort on ladders, scaffolding and steel.

Weather

Most job sites are outdoors. Extreme wind and ice can stop some work, which can affect your hours.

Physical load

You’ll stand, climb, bend, lift and move heavy materials through the day. Falls, cuts, sprains and overexertion are real hazards.

Precision

You’ll read plans, measure accurately and connect materials to exact specifications. Other trades depend on that work being right.

This is a gut check, not a test. Lots of people grow into parts of a job that feel new at first.

Questions

FAQs

How many years does it take to become an ironworker?

Most ironworkers complete a three- or four-year apprenticeship before reaching journeyman status. You’ll get paid on-the-job training and classroom instruction, and learn to read blueprints, install steel and reinforcing materials, use construction tools and follow safety procedures.

Some employers also offer on-the-job training outside formal apprenticeships, though its length and structure vary. A recognized apprenticeship gives you a structured foundation and shows employers your qualifications.

Can ironworkers make $100,000 a year?

Some do, but it isn’t typical. The median is $62,780 for structural iron and steel workers and $58,970 for reinforcing iron and rebar workers. The top 10% earned more than $108,260 and $104,540, according to BLS data from May 2025.

Your earnings depend on location, specialty, experience, employer and the projects you work on. Overtime and added responsibility can also affect your income.

Is being an ironworker a hard career?

Yes. It’s physically demanding and can be dangerous, especially when installing structural steel at height. You’ll spend much of the day standing, climbing, bending, lifting and moving heavy materials, often outdoors.

You also need to understand plans, measure accurately, communicate with other trades and follow strict safety procedures. Proper training and protective equipment are essential.

What is the fastest way to become an ironworker?

Apply directly for an apprenticeship through a local union or participating contractor. You generally need to be at least 18 with a high school diploma or GED, though requirements vary. A background in construction, welding or another hands-on trade can help you prepare.

Entry-level construction jobs can also give you exposure to tools, materials and job-site safety, and some employers train ironworkers outside an apprenticeship. Getting hired doesn’t make you fully trained, though. An apprenticeship still typically takes three to four years.

Are ironworkers still in demand?

Yes, though growth is modest. BLS projects 1% employment growth for ironworkers overall from 2025 to 2035, slower than the average for all occupations, and about 6,800 openings a year. Most of those openings come from replacing people who leave.

The outlook differs by specialty. Structural jobs are projected to grow 3%, while reinforcing iron and rebar jobs are projected to decline 5%.

Will ironworkers be replaced by AI?

It’s unlikely. AI and construction technology can help with planning, design, scheduling and project management, but installing and connecting steel still takes hands-on work on site.

Robots and automated equipment may change some tasks over time. Ironworkers still have to position materials, assess site conditions, secure structural components and respond to problems as they come up.

Why are ironworkers paid so much?

The work takes strength, technical knowledge and precision. Ironworkers handle heavy steel, operate specialized equipment, read plans and connect materials to exact specifications. A mistake can affect the safety of an entire building or bridge, so the training is extensive.

The job also carries real physical demands and safety risks, often at height and in bad weather. Apprentices receive raises as they gain experience and skills.

Is it too late to become an ironworker in your 30s or 40s?

No. Many apprenticeship programs accept adults changing careers, and experience in construction, manufacturing, welding or another hands-on job can help.

The bigger question is whether you’re physically prepared. Ironworkers lift heavy materials, climb ladders and scaffolding, and keep their balance at height. Talk with local training programs about what to expect.

Pack list

What ironworkers carry

Ask your program or employer for its list before you buy anything. Requirements vary, and some of this may be provided.

On the steel

  • Spud wrench
  • Bull pin
  • Sleever bar
  • Bolt bag
  • Tape measure

On rebar

  • Tie wire reel
  • Nippers
  • Gloves
  • Tape measure

On you

  • Hard hat
  • Fall protection harness
  • Work boots
  • Welding leathers, if you weld
Good to know

Paid maternity leave

Worth knowing when you compare jobs later. Union ironworkers who qualify can get paid maternity leave through IMPACT, a trust funded by the union and its contractors. If you work for a non-union employer, ask what it offers.

Pay
66.67% of normal weekly earnings, up to $800 a week, minus certain other disability income
Before delivery
Up to six months in total, if a doctor certifies from the fourth month of pregnancy on that you can’t do the work
Who qualifies
Apprentices and journeymen with 100+ hours worked in the past three months who are eligible for their local’s health plan
Limits
Used after other benefits run out, and once in 24 months. Doesn’t cover adoption, foster care, surrogacy or Canadian residents. IMPACT can change or end it.

Source: IMPACT Maternity Program. Confirm current terms with IMPACT or your local.

Get started

Find a program near you

You can get started before you’re old enough to apply.

See 24 women-focused programs by state

Share this with someone who needs to see it

Email it

Email this guide